NO HOT WATER? Follow These Very Easy Tips
NO HOT WATER? Follow These Very Easy Tips
Blog Article
Just about everyone has their own theory with regards to What Would Cause My Electric Water Heater to Stop Working?.
Many modern-day residences use an electric water heater for their heating system, as a result of its comfort as well as simplicity of use. However, just like any other electric home appliances, issues may arise with its use, suddenly. It can be really irritating to wake up to a cool shower as opposed to a warm one or having your bathroom with water that isn't hot enough or even also warm. Whatever the situation may be, water heater troubles can be quite nerve-racking. The good news is, we've made a list of feasible services to your water heater problems. There are a number of variables that might cause most of these issues, it could be a problem with the power supply, the electrical burner, or the thermostat. Before doing anything, ensure you switch off the main power supply for safety and security. Whatever the issue is, getting it fixed must not pose way too much of an issue if you adhere to these actions:
Call An Expert:
If after changing all malfunctioning parts and also resetting your temperature, the water heater still isn't functioning, you may require to call an expert plumber for a specialist viewpoint. The problem with your heating system could be that the hot and cold faucets have been switched or it might be undersized for the amount of warm water needed in your house. Whatever the situation might be, an expert plumber would aid solve the issue.
Check Your Power Supply:
As fundamental as this may appear, it is very essential. Without adequate power, your hot water heater will certainly not operate. So the first thing to do when your water suddenly stops working is to verify that it isn't a power trouble. Inspect if the fuse is burnt out or the circuit breaker tripped. If the breaker is the issue, merely turn it off and on again. Change any damaged or damaged fuse. Test the appliance with power after these adjustments to see if it's now working.
Check Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm sufficient, you may require to check the temperature level settings on your top thermostat. Make certain the circuit breaker is turned off before doing anything. Open up the gain access to panel as well as press the red switch for temperature reset above the thermostat. This must help heat the water. Transform the breaker back on and inspect if the trouble has been dealt with.
Inspect the Burner in the Water Heater:
If it's not a power issue, after that attempt having a look at your burner if it is still functioning. Test each of your heating elements to make sure the trouble isn't with any of them. If any of them is malfunctioning, change that component and then inspect whether the warm water is back on.
Verdict
Hot water heater problems are not always major. Much of them result from small issues like a blown fuse or worn-out burner. Changing the damaged components should do the trick. Nevertheless, if you are still not able to fix the trouble, give a call to your nearest plumber to come to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
Hopefully you enjoyed reading our article about How to Troubleshoot and Repair an Electric Water Heater. Thanks a lot for spending some time to read our piece. So long as you appreciated our blog posting please do not forget to share it. We treasure reading our article about What Would Cause My Electric Water Heater to Stop Working?.
Or Book Technician Here
Report this page